Work RPM v1.4 FS19
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-1.jpg)
![FS19 Other](https://www.farmingsimulator19mods.com/wp-content/uploads/2021/11/fs19-thumb.png)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-1-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-4-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-2-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-3-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-5-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-6-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-7-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-8-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-9-299x200.jpg)
![](https://www.farmingsimulator19mods.com/wp-content/uploads/2019/01/work-rpm-v1.4-fs19-10-299x200.jpg)
Work RPM v1.4 FS19
This mod increases motor RPM when using hydraulics tools (moving tools), tipping, unfolding, lifting or rotating implement etc. and show RPM Hud.
– RPM increase to these values by default:
– movingTools – minMotorRpm + 15%
– tippings – minMotorRpm + 40%
– folding / unfolding – minMotorRpm + 30%
– lifting / rotating implement – minMotorRpm + 30%
– folding / unfolding pipe – minMotorRpm + 10%
– you can set work RPM for any action in your VEHICLE XML file (see readme.txt in zip)
– you can deactivate increasing RPM for any action and it will be saved in your savegame for each vehicle
– RPM color switch to red when rpm reach 80% of maxMotorRpm
Controls:
– deactivate workRpm for tipping – “KEY_lctrl KEY_KP_1”
– deactivate workRpm for folding – “KEY_lctrl KEY_KP_2”
– deactivate workRpm for rotating – “KEY_lctrl KEY_KP_3”
– deactivate workRpm for lifting – “KEY_lctrl KEY_KP_4”
– deactivate workRpm for movingTools – “KEY_lctrl KEY_KP_5”
– deactivate workRpm for pipeFolding – “KEY_lctrl KEY_KP_6”
Credits:
kenny456, Xentro, Webby
Bad link
what do you mean? checked and it works
Works for me.
yes, me too.